The most accurate clock ever reported is a single aluminum ion at NIST, with a fractional uncertainty of 5.5 × 10-19. Yet the second has not been redefined, and next week's General Conference on Weights and Measures (October 13 to 15, 2026) is not set up to do it. The draft resolution says scientists still disagree on which atom, or mix of atoms, should define the new second, and it asks for a proposal in 2030. The record clock shows why the change is coming. It does not decide when or how.
What Is the Most Accurate Clock in the World Right Now?
As of October 2026, NIST's aluminum ion clock holds the accuracy record, according to its 2025 Physical Review Letters paper. NIST says the result is 41% better than the previous record and that the clock is 2.6 times more stable than any other ion clock. An aluminum ion keeps excellent time but is hard to read. So a magnesium ion trapped beside it cools it and reports its state, a method called quantum logic spectroscopy.
An uncertainty of 5.5 × 10-19 equals roughly one second in 58 billion years, by my arithmetic, more than four times the age of the universe. "Most accurate" is a statement about published uncertainty, though. A strontium lattice clock in China has reported 9.2 × 10-19, and records in this field change fast.
How Is the Second Defined Today?
Since 1967, the second has been 9,192,631,770 periods of the radiation tied to a transition in the cesium-133 atom. The 2018 revision rephrased this by fixing the cesium frequency at that number of hertz, but the idea did not change.
Cesium ticks at microwave frequencies. An aluminum ion's clock transition sits in the ultraviolet, roughly 100,000 times higher. Optical clocks divide time into finer marks, like a ruler with finer tick marks, and that is where their accuracy comes from.
Why Can't the Best Clock Simply Replace Cesium?
A definition is the ruler, and nobody can check a clock against something less precise than itself. The BIPM says in its redefinition FAQ that frequency accuracy is now limited by the definition, not by what the best labs can build. Several optical standards already serve as secondary representations of the second, and the draft resolution says the best devices beat the current realization by a factor of up to 100.
Labs therefore compare optical clocks with each other through frequency ratios. The criteria are strict. NIST says optical clocks must show accuracy equal to losing less than a second over 16 billion years, validated by at least three institutes that agree to better than a second over 6 billion years.
Why Hasn't the Second Been Redefined Yet?
Draft Resolution B, in the version published in July 2026, names the obstacles. There is no consensus on a single species or an ensemble. Some optical clock comparisons and frequency-ratio measurements show "noticeable inconsistencies." Some mandatory criteria are unmet, such as optical clocks' contribution to calibrating International Atomic Time. The draft says these could realistically be met by 2030.
The species fight is real. Sébastien Bize of France's LNE-SYRTE has said that about ten atomic transitions look promising. One proposal avoids picking a winner by defining the second from a weighted mix of the best optical transitions, because none stands out as the obvious choice and the field moves quickly.
The draft asks the International Committee for Weights and Measures to bring a definition and an implementation date to the 2030 meeting. Ratification cannot come earlier, according to the BIPM FAQ. A roadmap presentation by Helen Margolis lists 2034 as the backup. The final text can change at the meeting, so check the BIPM site after October 15.
Will a New Definition Change How Long a Second Is?
Not in any way you would notice. The roadmap requires continuity with the cesium-based definition, and the BIPM says cesium will remain a secondary standard. What improves is how precisely labs realize and share time, especially Coordinated Universal Time (UTC). The draft calls a more accurate UTC a potential gain, not a delivered one.
Earth's rotation, which earthquakes can nudge, is why leap seconds exist at all. That is a separate decision on the same agenda. Draft Resolution C would make UTC continuous from May 20, 2027, because a negative leap second, never yet used, carries risk. A CCTF and IERS workshop put its probability at 30% by 2035.
What Do Better Clocks Change Outside the Lab?
Time dilation makes a clock run slightly differently at different altitudes. LNE says optical clocks could therefore sense height differences better than one centimeter, finer than the best current geodetic methods.
Researchers also propose using optical clocks in dark matter searches. I found no claimed detection.
Moon missions need their own clock as well. Draft Resolution D backs a single international lunar time scale, because space agencies are planning lunar navigation and timing systems. The draft says using UTC directly would greatly complicate the most demanding lunar applications, because general relativity changes how clocks run there.
Pulsar timing arrays already turn dead stars into clocks to detect gravitational waves, so precise timing doubles as a science instrument. The same logic runs through GPS satellites, which depend on atomic clocks and relativity corrections. The draft resolutions also name transportation, energy distribution and telecommunications as users that need synchronized time.
Conclusion
The aluminum clock record is real, and so is the plan to rebuild the second around optical clocks. But a record is one lab's number. A definition needs several labs agreeing, clock comparisons that line up, and a time scale that can use the result.
Next week's meeting looks set to keep that work moving, not finish it. The thing to watch is whether the 2030 proposal names one atom or an ensemble, because that open choice, not the next accuracy record, is the real holdup.
Frequently Asked Questions
Will the second change at the October 2026 CGPM?
The draft does not propose a new definition. It asks for a proposal at the 2030 meeting, but the final decision rests on the vote.
Which atom will define the new second?
That is undecided. The draft says there is no consensus on a single species or an ensemble of species.
What is the difference between accuracy and stability in an atomic clock?
NIST describes accuracy as how close a clock comes to ideal "true" time. Stability is how efficiently it can measure time.
Is the leap second going away?
Draft Resolution C would make UTC continuous from May 20, 2027, if adopted. That decision is separate from redefining the second.
Can optical clocks help find dark matter?
Researchers say they could help with searches for it. I found no reported detection from clocks.